Home
Back
Draw Weight Adjustment Formula:
| From: | To: |
Draw weight adjustment calculates how a recurve bow's draw weight changes with different draw lengths. Standard bow measurements are taken at 28 inches, and weight increases or decreases by approximately 2.5 pounds for each inch above or below this standard.
The calculator uses the formula:
Where:
Explanation: For every inch your draw length differs from 28 inches, the actual draw weight changes by approximately 2.5 pounds.
Details: Using the correct draw weight is essential for archery performance, accuracy, and safety. Too heavy a weight can lead to poor form and potential injury, while too light a weight may lack the necessary power for your intended use.
Tips: Enter the bow's rated draw weight (measured at 28 inches) and your actual draw length. The calculator will show the adjusted draw weight you'll experience when drawing the bow to your length.
Q1: Is the 2.5 lbs per inch rule accurate for all bows?
A: This is a general guideline that works well for most recurve bows, but the exact adjustment may vary slightly depending on the bow's design and materials.
Q2: How do I measure my draw length?
A: Draw length is typically measured from the nock point to the pivot point of the bow grip plus 1.75 inches. Professional measurement at an archery shop is recommended.
Q3: Can I use this calculator for compound bows?
A: No, compound bows have a different weight curve due to their cam systems. This calculator is specifically for recurve bows.
Q4: Why is 28 inches the standard measurement?
A: 28 inches has become the industry standard for comparing bow weights as it represents an average adult draw length.
Q5: What if my calculated weight is negative?
A: This indicates your draw length is significantly shorter than 28 inches. In practice, draw weight cannot be negative, so consider this result as indicating a very light draw weight.